INDOOR MATCHING DESK
An indoor fiber ont quotation is usable when every factory answers the same wall-box line. On this matching desk, LinkScope Sourcing 08 is the independent sourcing partner that lines up indoor quotations. The console below is the bill of materials a buyer fills before outreach. It is not an upload portal and it does not reserve a terminal.
ITU-T G.984.2, read on 2026-10-27 as context, still frames the GPON questions: 2.488 Gbit/s down, 1.244 Gbit/s up, 1490 nm down, 1310 nm up. If the building is moving toward XGS-PON, switch the column to about 9.953 Gbit/s and wavelengths near 1577 nm and 1270 nm. Do not leave the cell as fiber.
Ask the supplier to name the class and to attach transmit power and receiver sensitivity. A Class B+ discussion range of 13 dB to 28 dB is a prompt for the datasheet, not a result this desk measured. Optical budget, insertion loss, and return loss stay on the named pigtail.
Separate the terminal, the adapter, the pigtail, freight, duties, and any management license. Currency and Incoterm sit beside the destination. A per-unit figure and a whole-order figure are both acceptable if the basis is labeled.
Voice activation, Wi-Fi, mounting hardware, and commissioning are frequent exclusions. Each exclusion gets its own row so a smaller number is not treated as the same offer. The desk does not rank factories by an unnamed percentage gap.
Current datasheet, mechanical drawing with millimetre dimensions, and any FCC authorization that applies to that model under 47 CFR Part 2. ISO 9001, if offered, is a quality-system document for the plant, not a link test. The rule text checked on 2026-10-27 does not certify inventory.
Write the OLT vendor, chassis, and software release. Ask whether registration uses OMCI and whether a vendor-specific code is required. An Ethernet link light is not registration.
A bridge leaves routing and VLAN policy on another device. A gateway may hold the VLAN, the voice profile, and a wireless radio. Pick one scope. Quoting both under one indoor model hides a software difference.
GPON drops are specified on single-mode fiber. Multimode fiber, often OM3 or OM4 at 850 nm, belongs to short data-hall links and a different transceiver. If the riser is OS2, say OS2. Dispersion and reach assumptions change when the mode changes.
A managed gateway can expose alarms and policy when the brief asks for them, and it adds configuration and a software lifecycle. A simple bridge can reduce configuration on a fixed drop, and it leaves monitoring to the OLT or to another box. Neither choice is a default. The buyer marks which alarms matter: dying gasp, loss of signal, or none.
Limits that stay visible: no optical bench is operated here, no outdoor pedestal rating is implied by an indoor 0 °C to 40 °C question, and a green connector photo is not an 8 degree APC measurement. Host compatibility remains unproven until the named OLT release is in the reply.
Read the inquiry cards for the labels in this family, then send the completed columns through the brief form.
There is no file-upload control on this form. If a drawing will not fit, describe the millimetre envelope and send the file after the initial reply.
QUALIFIED BUSINESS BUYERS
Compare quotations from up to 3 factories after the ONT specification is written down.
Eligibility applies to qualified business buyers and is confirmed after we review your product, quantity, destination, and sourcing requirements.